Download the Helium Rough
 

Helium Rough 4.55 build 3196

26 June, 2009

Helium Rough for hasp HL pro version 4.55.3196 is released on 7 May, 2009

  1. New batch laser marking mode
  2. New safety laser marking option
  3. Checking shift of stone position during scanning and marking
  4. Optimization algorithms are improved
  5. Inclusions textures on photorealistic images
  6. Export set of burning lines into separate file *.bdl from Pacor Client and mark it on Helium Rough

More details >>

Download Helium Rough report templates
Download Helium Polish report templates

News subscription

Email address


HeliumRough.zip (7,07 Mb) - Download and replace file HeliumRough.exe from the downloaded archive HeliumRough.zip. You can find the file HeliumRough.exe in the root folder of the program Helium Rough. The default path is C:\Program Files\OctoNus Software\Helium-Rough.

Important notice

To use new program make following actions once after replacement of HeliumRough.exe file:

  1. In the root folder of Helium Rough folder find file HeliumStart.mmd. Right click on file HeliumStart.mmd and select Properties, in the string with attributes find box Read only. Make sure that it is not Read only, otherwise uncheck box Read only and press Ok
  2. Run program HeliumRough.exe
  3. Press Other.. in the panel Marking-out / tab Env to open panel Additional data
  4. Uncheck box Cascade simplification
  5. Save HeliumStart.mmd
  6. Exit program
  7. Check box Read only in properties of files HeliumStart.mmd again

Hasp HL key (short)HASP HL Driver

If you install this software first time please also download and install the Hasp HL driver

HASPUserSetup.exe (1,8 Mb) - Hasp HL device driver installation program for Windows.The installation should be run with an administrative account

Important! Please read this before download

1. Use new templates of reports

To correct use new version of the program download corresponding new templates of the reports (8 February, 2008)
For allocated diamonds use templates of the reports for Helium Polish for brilliant, prince, princess-3s, emerald, baguette, square baguette, ASCII, DLL, unknown cuts etc (10 June, 2009)

2. Use new set of optimization algorithms

Work with the program since version 4.37 with new set of optimization algorithms (15 December, 2008)

3. Dx.dll
To work with new possibilities of the program since version 4.37 you need to use dx.dll. The dx.dll is available for download in archive dx_dll.zip (15 December, 2008) Unpack dx_dll.zip into the same folder as HeliumRough.exe

4. Oxjsr.dll and HeliumRP.dll
To work with new possibilities of the program since version 4.21 you need to use oxjsr.dll and HeliumRP.dll. The new Dll are available for download in archive dll.zip (8 February, 2008) mfc80redist.zip contains necessary microsoft dll for correct working new HeliumRP.dll

5. Note
We recommend saving all previous files before downloading and installation of new files in separate folder (for example, Archive). In case of necessity you can use them.